Technical Support

Mobile Broadband - Billion 7402GXL Setup

Plug the 3G modem into the USB slot on the back of the Billion Router. Then plug in the Ethernet cable from the LAN Port on the back of the router into your PC or Laptop (windows should automatically set it up).

Turn on the device and open Internet Explorer

generic

Type the following in the address bar: 192.168.1.254

generic02

When prompted for a username and password, type:

  • Username: admin
  • Password: admin

generic03

Once logged in click on Advanced on the left hand side.

7402GXL01

Click on Configuration, click on WAN, and then click on WAN Interface.

7402GXL02

Change the Main Port to 3G and click on Apply. 7402GXL03

Click on WAN Profile on the left hand side:

7402GXL04

Set it up as follows. Then click on Apply.
Please note, the l is a lower case L.

7402GXL05

Click on ADSL Mode on the left hand side.

7402GXL06

Set the settings as follows. Click on Apply.

7402GXL07

Click on Save Config at the bottom.

7402GXL08

Click on Apply to save the settings to flash.

7402GXL09

Click OK when the successful message comes up.

7402GXL10

You have now setup your Billion Router successfully.